The Raspberry Pi is being powered with a 12VDC 1500mA wallwart connected to 2A DC-DC converter set to around 5.2V output.

There is a 1TB SATA drive connected to the Pi with a SATA-USB cable. The Raspberry Pi Hub setup consists of a Raspberry Pi 2 Model B (if you have a RPi 3, use that board instead) with a Sandisk Ultra 16GB class 10. You can use the preceding links or go directly to /tools to find all the parts for your projects at the best price! 4x Standard micro usb 5V 2.5A power supply.4x MicroSD Card 8 or 16GB – the fastest you can afford.4x Raspberry Pi Camera (read What’s the Best Raspberry Pi Camera For Your Project?).4x Raspberry Pi Zero W (with built-in Wi-Fi).1x 5V power supply capable of powering both the Raspberry Pi and the SATA drive separately.1x MicroSD Card 8 or 16GB – the fastest you can afford.1x Raspberry Pi 3 (or any other model you have).Here are all the parts needed for this project. The following figure shows a high-level overview of the project. The surveillance system built includes: one Raspberry Pi acting as a HUB with 1TB SATA, and 4 cameras (each one connected to a Raspberry Pi Zero W) that can be monitored through the HUB.Īll devices are connected to your local network, and you can access all the cameras through the hub using a browser on your computer (or other device on the local network). This project was written by Julian Silver and edited by Rui Santos and Sara Santos.įor an introduction to the MotionEyeOS, you can read this introductory blog post.

Raspberry pi zero w camera setup